Working With Batteries - Keysight Technologies N9340B User Manual

Getting Started

Working with Batteries

Working with Batteries
Full charge the battery before first using the analyzer.
CAU TI O N
CAU -
Installing a Battery
Step
1 Open the battery cover
2 Insert the battery
3 Close the battery cover
Viewing Battery Status
Determine the battery status using either of the
following methods:
• Checking the battery icon in the lower-right corner of
the front-panel screen: it indicates the approximate
level of charge.
• Press the gray button in the upper right corner of the
battery, the number of lighted green LED indicates
the percentage of the battery power.
• Press [SYS] > {More} > {Show System} > {Page down}
to check the current battery information.
16
Notes
Use a phillips type screwdriver,
loosen the retaining screw, then
pull the battery cover open.
Observe correct battery polarity
orientation when installing.
Push the cover closed, then
re-fasten the cover with the
retaining screw.