Limit - Keysight Technologies N9340B User Manual

LIMIT

Limit Line
Key access: [Limit] > {Limit Line}
Activates an adjustable horizontal line that is used as a
visual reference line.
The limit line, used for trace arithmetic, has amplitude
values that correspond to its vertical position when
compared to the reference level. The value of the display
line appears in both the active function block and on the
left side of the display. The arrow keys, knob, or numeric
keypad may be used to adjust the display line. Pressing
any digit, 0 through 9, on the numeric keypad brings up
the selected terminator menu. To deactivate the display
line, press Display Line (Off).
Limits
Key access: [Limit] > {Limits}
Turns on the limit pattern function and turns off the limit
line function simultaneously.
Edit Limits
Key access: [Limit] > {Edit Limits}
Allows you to set a limit pattern for measurements.
You can edit limit points, limit table and limit offset for
your limit pattern.
Pressing X Axis Unit to toggle the frequency domain or
time domain before you set the parameter of limit point.
Key Reference
LIMIT
137