Wavetronix SmartSensor HD User Manual page 9

8
SmartSensor HD User Guide
•
A SmartSensor HD quick start guide
˿
The following aren't automatically included but are necessary for
installation:
Sensor mount
˿
SmartSensor 8-conductor cable
˿
To support the sensor installation, you may need to order devices for
power conversion, surge protection and communication, including
some or all of the following:
Contact closure device (Click 100, 104, 110, or 112/114)
˿
Click 200 surge protector
˿
Click 201/202 AC to DC converter
˿
Click 210 circuit breaker
˿
Click 230 AC surge protector
˿
Click 301 serial to Ethernet converter
˿
For convenience, you can get these devices preassembled and prewired
in pole-mount boxes and cabinet backplates, available from Wavetronix.
Service information
Don't try to service or repair this unit; none of its components or
parts are serviceable in the field. Attempting to open this unit, unless
expressly directed by Wavetronix, will void the customer warranty, as
will any visible damage to exterior seal labels. Wavetronix is not liable
for any bodily harm or damage caused if unqualified persons attempt to
service or open the back cover of this unit. Refer all service questions to
Wavetronix or an authorized distributor.
Important note
Failure to follow the installation guidelines laid out in this guide could
result in decreased performance. If you believe it is necessary to deviate
from these guidelines, contact a Wavetronix application engineer or
technical support for assistance and recommendations.