Doosan DE08TS Disassembly/Assembly page 9

IEED011P
15. Disconnect two transmission cooling hoses (16)
from the transmission.
16. Disconnect transmission oil temperature switch
wiring (17).
IEED012P
17. Disconnect two engine cooling hoses (18 ) from
the engine.
20
19
IEED013P
18. Remove bolts (19), washers, nuts from the two
engine support (20), one on both side of the
engine.
DE08TS Diesel Engine
17
21
16
IEED014P
19. Remove bolts (21), washers and nuts from the
NOTE : At this point, make a final check to be sure all
removals and disconnections have been made from
the engine and the transmission.
A
18
IEED015P
20. Install the tool (A) to the transmission. Fasten tool
21. Remove engine and transmission (22) from the
22. Put the engine and transmission on an
7 of 76
two transmission support.
22
(A) to the engine and transmission as shown.
lift truck.
acceptable engine stand. Remove tool (A).
Disassembly and Assembly