Doosan DE08TS Disassembly/Assembly page 16

IEED023P
5. Remove bolts (7), washers and cover (8).
IEED024P
6. Make an alignment of the timing marks on fuel
injection pump gear (9) and the idle gear or put a
mark of identification on the gears for correct
installation.
IEED117P
7. Remove nut (10) from the injection pump coupling.
DE08TS Diesel Engine
9
8
7
IEED118P
8. Remove nut (11) and injection pump coupling and
gear (9) from the injection pump.
IEED025P
9. Disconnect accel rod (12) and engine stop cable
(13).
10
14
IEED026P
10. Disconnect five hoses (14) and tubes (15) from
the injection pump.
14 of 76
12
13
14
Disassembly and Assembly
11
9
15
14