Doosan DE08TS Disassembly/Assembly page 57

Disassemble Pistons A14615-07
Tools Needed
Pliers
Pliers
Drive Group
Start By :
a. Remove piston
1
IEED110P
NOTE : Put identification on all parts for correct
assembly.
1. Remove rings (1) from piston (2) with tool (A).
IEED111P
2. Remove retaining ring (3) from both side of the
piston with tool (B).
3. Remove pin (4) and connecting rod (5) from piston
(2).
DE08TS Diesel Engine
A B C
2
3
4
2
1
1
1
IEED112P
4. Remove bushing (6) with tool group (C) from
connecting rod (5).
5. See Specifications for use of the parts again.
Assemble Pistons A14615-08
Driver Group
Piston Ring Groore Cleaner
Pliers
Pliers
5
IEED112P
1. Install the bushing in connecting rod (5) with tool
group (A) and a press. Make the new bushing to
the correct size with one.
See SPECIFICATIONS.
55 of 76
6 5
Tools Needed
6 5
Disassembly and Assembly
A B C D
1
1
1
1