Doosan DE08TS Disassembly/Assembly page 10

25
24
IEED016P
23. Support transmission (24) with fasten a strap and
remove twenty bolts(23) and washers. Remove
transmission (24) from engine (25).
Install Engine And Transmission
A10999 & C40999 - 03
Tools Needed
Link Bracket
Eye Bolt
25
24
IEED016P
1. Put transmission (24) in position in engine (25).
2. Install bolts (23) and washers that hold
transmission to the engine. Tighten bolts (23) to
torque of 55 ± ± 10 N � � m (40 ± ± 7 lb � � ft).
DE08TS Diesel Engine
23
IEED017P
3. Install the tool (A) to the transmission.
4. Fasten tool (A) to engine and transmission (22) as
shown.
21
A B
1
1
IEED014P
23 5. Put the engine and transmission in position on the
lift truck. Make an alignment of supports with the
frame.
6. Install bolts (21), washers and nuts that hold the
transmission support to the frame.
Tighten bolts (21) to a torque of 730� � 800 N � � m
(540 � � 590 lb � � ft).
8 of 76
22
Disassembly and Assembly
A