Doosan DE08TS Disassembly/Assembly page 67

Hide thumbs Also See for DE08TS:
Table of Contents

Advertisement

IEED131P
5. Remove bolts (5) and washers that hold adapter
(6) on the flywheel.
6. Remove adapter (6) from the flywheel.
7
IEED132P
7. Remove two bolts (7) and washers that hold
bushing on adapter (6).
8. Replace bushing (8) with new one if they was
worn or damaged.
IEED133P
9. Remove two bolts opposite each other and install
two M14x1.5 guide bolts in the flywheel.
10. Remove the remainder of bolts (9) and then
remove flywheel (10).
DE08TS Diesel Engine
5
6
8
6
9
10
65 of 76
11
IEED007S
11. Remove flywheel ring gear (11) with a brass
punch. If necessary, put a little heat on the
flywheel ring gear.
Install Flywheel A13366-03
Tools Needed
Dial Indicator Group
11
IEED007S
1. Heat ring gear (11) to a maximum temperature of
246℃(475℉). Install the ring gear so the chamfer
on the gear teeth is next to the starter pinion when
the flywheel is installed.
Disassembly and Assembly
A
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D100D120D150D130s-5D160s-5D110s-5

Table of Contents