Doosan DE08TS Disassembly/Assembly page 47

11
IEED097P
NOTE : Mark front cover (11) for the purpose of
reassembly.
9. Remove front cover (11) from the pump housing.
10. Check the conditions of bushings (12) in the front
cover. Replace with new ones if worn or
damaged.
NOTE : Assemble the oil pump in reverse order of
removal.
End By :
a. Install oil pump.
DE08TS Diesel Engine
Rocker Shaft & Push Rods
Remove Rocker Shaft & Push
Rods A17744 & A17702-02
Start By :
a. Remove head cover
12
3
IEED098P
1. Remove bolts (2) and washers from the rocker
shaft assembly. Remove rocker shaft assembly (1)
from the cylinder head.
2. Remove twelve push rods (3).
Install Rocker Shaft & Push
Rods A17744 & 17702-03
3
IEED098P
1. Install push-rods (3) coated with engine oil in the
cylinder head.
2. Install rocker arm shaft assembly (1) and align the
end of the rocker arm adjust screw with the push
rod, then tighten bracket bolts (2).
3. Adjust valve clearance as following procedure ;
45 of 76
2
1
2
1
Disassembly and Assembly