Doosan DE08TS Disassembly/Assembly page 69

7
IEED132P
8. Install bushing (8) in position on adapter (6) and
tighten bolts (7) to a torque of 12 ± ± 4 N� � m (106
± ± 35 lb� � in).
9. Put the anti-seize compound (FEL-PRO C5-A)
inside of bushing (8).
IEED131P
10. Put adapter (6) in position and install bolts (5) and
washers that hold adapter (6) on the flywheel.
Tighten bolts (5) to a torque of 55± ± 10 N� � m (40
± ± 7 lb � � ft).
DE08TS Diesel Engine
8
6
IEED130P
11. Put the adapter and ring gear assembly (4) in
1
5
6
IEED129P
12. Put adapter (2) in position and install bolts (1) that
End By :
a. Connection engine and transmission.
67 of 76
position and install bolts (3) and washers that
hold adapter and ring gear assembly (4) on the
flywheel. Tighten bolts (3) to a torque of
55 ± ± 10 N� � m (40 ± ± 7 lb � � ft).
hold adapter (2) on the flywheel housing. Tighten
bolts (1) to a torque of 55 ± ± 10 N � � m (40 ± ± 7 lb � � ft).
Disassembly and Assembly
3
4
2