Doosan DE08TS Disassembly/Assembly page 17

IEED027P
11. Remove four nuts (16) and washers that hold the
injection pump in place. Remove the gasket and
discard it.
IEED028P
12. Support injection pump (17). Remove two bolts
(18) and washers that hold injection pump (17) on
the block. Remove injection pump (17).
DE08TS Diesel Engine
16
18
17
15 of 76
Install Fuel Injection Pump
A25663 - 03
IEED028P
1. Install the new gasket in position on the timing
gear case. Put fuel injection pump (17) in position
on the timing gear case.
IEED024P
2. Make sure the timing marks or the marks that were
put on the fuel injection pump gear (9) and the idle
gear are in alignment.
IEED027P
3. Install four nuts (16) and washers that hold the fuel
injection pump on the timing gear case.
Disassembly and Assembly
17
9
16