Fuel Injection Pump - Doosan DE08TS Disassembly/Assembly

Install Alternator B31018 - 03
3
5
IEED021P
1. Put alternator (6) in position on its bracket and
install bolts (5) that hold it.
2. Install fan belt (3) on the alternator and tighten nuts
(4).
6
IEED020P
3. Connect all wires (1) to their respective positions.
4. Connect ground cable (2) to alternator (6).
DE08TS Diesel Engine
5
4
6
2
1
13 of 76

Fuel Injection Pump

Remove Fuel Injection Pump
A25663 - 02
Start By :
a. Remove air compressor (if equipped).
b. Remove intake manifold.
2
1
IEED022P
1. Remove two bolts (1) and washers.
2. Remove bolt (2), washers, spacer (3) and lifting
bracket (4).
5
IEED166P
3. Remove bolts (5) and washers that hold the
tension adjusting bracket on the timing gear case.
4. Remove the idle pulley and V-belt tension
adjusting bracket assembly (6) and gasket.
Discard the gasket.
Disassembly and Assembly
3
4
6