Doosan DE08TS Disassembly/Assembly page 61

IEED118P
3. Remove nut (5) and injection pump coupling and
gear (6) from injection pump.
IEED119P
4. Remove six bolts (7) and washers that hold
injection pump gear (8) in place and remove
injection pump gear (8).
IEED120P
5. Remove four bolts (9), washers that hold camshaft
gear in place.
6. Remove camshaft gear (10) from camshaft.
DE08TS Diesel Engine
Install Timing Gears A16387-03
5
6
IEED120P
7
1. Put camshaft gear (10) in position on the camshaft
and install washers and bolts (9). Tighten bolts (9)
to a torque of 22 N
8
IEED121P
2. Put injection pump gear (8) in position on coupling
9
and install washers and bolts (7).
3. Spread the end of bolts (7).
10
59 of 76
Tools Needed
Dial Indicator
� � m (16 lb � � ft).
Disassembly and Assembly
A
1
9
10
7
8