Doosan DE08TS Disassembly/Assembly page 63

Install Timing Gear Case
A17198-03
IEED122P
1. Install a new gasket on the timing gear case.
2. Put timing gear case (2) in position on the cylinder
block and install bolts (1) that hold it.
End By :
a. Install oil pan.
b. Install fuel injection pump.
c. Install timing gears.
DE08TS Diesel Engine
1
2
61 of 76
Camshaft & Camshaft
Bearing
Remove Camshaft & Camshaft
Bearing A17174 & 17078 - 02
Start By :
a. Remove rocker shaft and push rods
b. Remove timing gear cover
IEED123P
1. Remove four bolts (1), washers that hold camshaft
gear (2) in place.
2. Remove camshaft gear (2) from the camshaft.
IEED124P
3. Remove bolts (3), washers and flange (4) from the
camshaft.
Disassembly and Assembly
1
2
3
4