Doosan DE08TS Disassembly/Assembly page 38

Disassemble Water Pump
A53663-07
Tools Needed
Gear Puller
Pliers
Drive Group
Start By :
a. Remove water pump
1
IEED068P
1. Remove flange (1) using tool (A).
4
IEED069P
2. Remove three screws (2) that hold pump cover (3)
on the pump housing.
NOTE : Before unscrewing the screws (2) slight
impacts on them are necessary to loosen the loctite
connection.
3. Remove pump cover (3) and gasket (4) and
discard it.
DE08TS Diesel Engine
A B C
1
1
A
3
2
1
IEED070P
4. Remove snap ring (5) with tool (B).
6
IEED071P
5. Put the water pump in position on a press. Install
tool (C) and remove shaft assembly (6) from the
impeller and the water pump housing.
IEED072P
6. Remove seals (7) from the water pump housing if
they are damaged.
36 of 76 Disassembly and Assembly
5
7