Doosan DE08TS Disassembly/Assembly page 58

IEED113P
2. When the oil pistons are used, clean the piston
grooves with tool (B) before the rings are installed.
NOTE : The concave area (the part that makes the
curve to the inside) in the piston is toward one side of
the piston. Install the piston on the connecting rod
with the concave area toward the side which has the
connecting rod and cap identification on it.
IEED111P
3. Slide connecting rod (5) inside the piston. Install
pin (4) in the piston and the connecting rod.
DE08TS Diesel Engine
Typical Example
3
4
2
IEED110P
4. Install a retaining ring (3) on both side of the piston
(2) with tool (C).
5. Install rings (1) on the piston with tool (D).
NOTE : See Specifications for piston ring location.
End By :
a. Install pistons.
5
56 of 76
1
Disassembly and Assembly
2