Sending A Message; Configuring Global Services; Viewing The Management Servers List - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Sending a Message

Configuring Global Services

Viewing the Management Servers List

9–4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
If you are experiencing difficulties with connectivity or audio, you may want
to send a message to the system that you are managing.
Only the near site can see the message; it is not broadcast to all the sites in the
call.
To send a message using the Polycom HDX web interface:
In your web browser address line, enter the HDX system's IP address.
1
Enter the Admin ID as the user name (default is admin), and enter the
2
Admin Remote Access Password, if one is set.
Go to Diagnostics > Send a Message.
3
In the Send a Message page, enter a message (up to 100 characters in
4
length), then click Send.
The message is displayed for 15 seconds on the screen of the system that
you are managing.
If your organization uses the Polycom Global Management System, you can
configure, manage, and monitor the Polycom HDX system using the Global
Management System server. Global Management System is a web-based
client/server software tool that allows administrators to manage a network of
video conferencing systems.
On networks managed by the Global Management System, several Global
Servers may be configured to manage this system remotely. The system also
has a primary Global Management System server that performs account
validation. You can view information about these servers, but this information
can only be changed by the Global Management System Administrator.
To view the management servers list:
>> Do one of the following:
— In the local interface, go to System > Admin Settings > Global
Services > Management Servers.
— In the web interface, go to Admin Settings > Global Services >
Management Servers.
Polycom, Inc.