Reset Or Restart System; Send A Message; System Log; Sessions - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Reset or Restart System

Send a Message

System Log

Sessions

11–8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Diagnostic Tool Description
Restart (web only) Restart in the web interface cycles power to the system.
Reset System Note: If a password is set, you must enter it to reset the
(system only) system.
When you choose Reset System using the remote
control, the system's user interface allows you to do the
following:
•
•
You may want to download the CDR and CDR archive
before you reset the system. Refer to
(CDR)
This setting appears in the web interface only. Use this setting to send a
message to the embedded interface of a Polycom HDX system you are
managing.
This setting appears in the web interface only. For information about using
system logs, refer to System Logs
This setting appears in the local interface only. When you select the setting,
information about the sessions that are currently running on the HDX system
is displayed.
Diagnostic Screen Description
Type Displays the type of connection, for example, Web.
User ID Displays the ID of each user who is logged in.
Remote Address Displays the IP addresses of people logged in to the HDX
system from their computers.
Duration Displays the duration of the session in hours, minutes, and
seconds for each user currently logged in.
Idle Displays how long the session has been idle, in seconds.
Keep your system settings (such as system name and
network configuration) or restore factory settings.
Keep or delete the directory stored on the system.
System reset does not affect the global directory.
on page 11-9.
on page 11-13.
Call Detail Report
Polycom, Inc.