Connecting A Monitor To A Polycom Hdx 4500 System; Using A Polycom Hdx 4000 Series System Monitor With A Computer; Configuring Monitor Settings - Polycom HDX 4000 Series Administrator's Manual

Connecting a Monitor to a Polycom HDX 4500 System

Using a Polycom HDX 4000 Series System Monitor with a Computer

Configuring Monitor Settings

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following table shows how you can connect a monitor to a Polycom
HDX 4500 system. Note that DVI is supported for Video-1 only on the monitor
that Polycom provides.
Video Output Number
1
1
2
1 You can use Output 2 for a digital video recorder (DVR), but not with S-Video.
2 Select DVI if the monitor is connected using HDMI or DVI-D.
You can use the Polycom HDX 4000 series system monitor as a high-resolution
display for your computer, as shown on the quick start guide.
To use the Polycom HDX 4000 series system monitor as the monitor for a
computer:
Connect a cable from the DVI connector on the back of the Polycom
1
HDX 4000 system to the DVI or VGA connector on your computer.
To use the system's built-in speakers for your computer's audio, connect
2
the 3.5 mm audio cable from your computer to the audio input connector
on the Polycom HDX 4000 series system.
To configure monitors:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Monitors >
Monitors (select
— In the web interface, go to Admin Settings > Monitors.
Connector Output Formats
DVI-I DVI
DVI-I VGA, DVI
if necessary).
Monitors and Cameras
2 , Component
3–3