Configuring Ip Settings; Specifying H.323 Settings - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Configuring IP Settings

2–8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configure the following DNS setting:
4
Setting Description
DNS Servers Displays the DNS servers currently assigned to the Touch Control.
If the Touch Control does not automatically obtain a DNS server
address, enter up to two DNS servers here.
You can specify IPv4 DNS server addresses only when the IPv4
address is entered manually. When the IPv4 address is obtained
automatically, the DNS Server addresses are also obtained
automatically.
Optionally, view the general settings:
5
Setting Description
Duplex Mode Displays the duplex mode.
LAN Speed Displays the LAN speed.

Specifying H.323 Settings

If your network uses a gatekeeper, the system can automatically register its
H.323 name and extension. This allows others to call the system by entering
the H.323 name or extension instead of the IP address.
To specify H.323 settings:
Do one of the following
1
— In the local interface, go to System > Admin Settings > Network > IP
> H.323 Settings.
— In the web interface, go to Admin Settings > Network > IP Network
> H.323 Settings.
Polycom, Inc.