Recording A Call To Videotape Or Dvd - Polycom HDX 4000 Series Administrator's Manual

Recording a Call to Videotape or DVD

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
All audio from the near site and far site is recorded, along with the VCR/DVD
Record Source video as configured on the Monitors screens. VCR and DVD
video output is standard-definition format. Polycom HDX systems scale other
formats to standard definition.
To configure VCR/DVD video settings for recording a call:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Monitors >
Monitors (select
— In the web interface, go to Admin Settings > Monitors.
Set the aspect ratio and video format for recording.
2
Select one or more sources for the VCR/DVD Record Source.
3
If you select both near and far, the Polycom HDX system automatically
switches recording to the site that is talking. If you select content as a
record source, it is recorded (when available) regardless of who is talking.
For more information about configuring VCR/DVD settings for recording
a call, refer to the Monitor 3 settings in the table under
Monitor Settings on page 3-3.
Polycom HDX systems record video in standard definition (SD) format only.
To configure VCR/DVD audio settings for recording a call:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Audio >
Stereo Settings (select
— In the web interface, go to Admin Settings > Audio.
Clear Enable Polycom StereoSurround.
2
Do one of the following:
3
— In the local interface, go to System > Admin Settings > Audio >
Inputs/Outputs (select
— In the web interface, go to Admin Settings > Audio.
Adjust the Line Out Level for playback volume, if necessary.
4
Enable VCR/DVD Audio Out Always On unless you have the
5
VCR/DVD inputs and outputs both connected to the same device to play
and record.
Content and Closed Captions
if necessary).
if necessary).
if necessary).
Configuring
5–3