Specifying Sip Settings - Polycom HDX 4000 Series Administrator's Manual

Specifying SIP Settings

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Enter a prefix or suffix for each bandwidth you want to allow for gateway
3
calls.
The use of suffixes and prefixes is dependent on the gatekeeper, gateway
capability, and gateway configuration. Associating prefixes and suffixes
with particular bandwidths on your gateway can optimize the use of
bandwidth by your organization. Be sure the gateway is configured to use
the same prefixes and suffixes you define for the system.
If your network supports the Session Initiation Protocol (SIP), you can use SIP
to connect IP calls.
To specify SIP Settings:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Network > IP
> SIP Settings (select
— In the web interface, go to Admin Settings > Network > IP Network
> SIP Settings.
Configure these settings:
2
If you installed the Microsoft real-time video (RTV) software option key, several of
the SIP configuration fields described in the following table are named differently to
align with Microsoft terminology.
if necessary).
Networks
2–15