Polycom HDX 4000 Series Administrator's Manual page 311

Administrator's Guide for Polycom HDX Systems
Admin Settings Area/Setting
General Settings>Pairing
Allow Polycom Touch Control to Pair with This System
SmartPairing Mode
Global Services>Directory Servers
XMPP
Note: Controlled only through CMA or RealPresence
Resource Manager system provisioning.
LDAP
Global Services>Calendaring Service
Enable Calendaring Service
When you use the setup wizard, you must follow these procedures:
• When the Security Mode setting is enabled, you must change the Room password.
• When user login is required, you must create a User password.
• When you use the Maximum Security Profile, you must change the Admin ID and User ID.
Consider these additional restrictions when you use the Maximum Security Profile:
• The Recent Calls feature is not available on the home screen of the local interface.
• Polycom GDS and Microsoft Lync Server 2010 are not available in the Directory Servers settings.
• SIP is not available in the IP Network settings.
If your HDX system operates with the Security Mode setting enabled, the following restrictions apply:
• An Admin Room password is required, with a minimum length of 1 character.
• Telnet and SNMP remote access are disabled.
• The HTTP port is disabled and the HTTPS port is fixed at 443.
• Web sessions are enabled.
• NIDS is enabled.
• All cryptography is FIPS-validated.
Polycom, Inc.
Maximum
(was DoD/DSN)
Range
Checkbox
Disabled
Checkbox
Checkbox
Checkbox
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Default
Value Configurable? Range
Disabled Yes Checkbox
Disabled Read Only Disabled
Automatic
Disabled Read Only Checkbox
Disabled Yes Checkbox
Disabled Read Only Checkbox
High
Default
Value Configurable?
Disabled Yes
Disabled Yes
Disabled Yes
Disabled Yes
Disabled Yes
E–6