Polycom Hdx 8000 Series, Polycom Hdx 7000 Series, And Polycom Hdx 6000 Series Indicator Light; Powering On The Polycom Hdx 4000 Systems - Polycom HDX 4000 Series Administrator's Manual

Polycom HDX 8000 Series, Polycom HDX 7000 Series, and
Polycom HDX 6000 Series Indicator Light

Powering On the Polycom HDX 4000 Systems

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To power off the Polycom HDX 8000 series, Polycom HDX 7000 series, or
Polycom HDX 6000 series system, do one of the following:
• Press and hold the
• Press and hold the power switch on the front of the system for 2 seconds.
After turning the power off in this way, wait until the power light stops
flashing, which might take several seconds, before you unplug the system
from its power source.
The indicator light on the front of the Polycom HDX 8000 series, Polycom HDX
7000 series, and Polycom HDX 6000 series systems provides this information:
Indicator Light
Off
Steady blue light
Blinking blue light
Steady amber light
Alternating blue and amber lights
To power on a Polycom HDX 4000 system, do one of the following:
• Press the power button on the front of the system.
• Press the power button on the side of the monitor.
The Polycom splash screen is displayed within about 10 seconds.
To power off a Polycom HDX 4000 system monitor:
>> Press the power button on the side of the monitor.
The monitor enters standby mode. The system stays powered on.
Introducing the Polycom HDX Systems
power button on the remote control for 2 seconds.
System Status
System is without power.
System is initializing.
System is awake.
System received an IR (infrared) signal.
System is asleep.
System is in software update mode.
System is in factory restore mode.
1–11