Configuring Directory Settings - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Configuring Directory Settings

6–6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To configure system settings:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > General
Settings > System Settings > Directory (select
— In the web interface, go to Admin Settings > General Settings >
System Settings > Directory.
Configure these settings on the Directory screen:
2
Setting Description
System Name Enter or change the system name in this field. This name
appears on the screen for the far site when you are making
calls.
Note: The first character of a System Name must be a letter
or a number. The System Name cannot begin with the dollar
sign ($) or underscore (_) character.
Localized System Displays the localized system name, if you have entered
Name one. You can enter a Localized System Name for
Simplified Chinese on this screen using the Chinese Virtual
Keyboard. You must use the Polycom HDX web interface to
enter localized system names for other languages.
Preview Directory Specifies whether to display a preview of each entry on the
Entry Information Directory screen.
This setting is not supported if the Polycom HDX system is
paired with the Polycom Touch Control.
Allow Directory Specifies whether users can save changes to the directory
Changes or Favorites list.
This setting is not supported if the Polycom HDX system is
paired with the Polycom Touch Control.
Confirm Directory Specifies whether users are prompted to confirm deletions
Deletions of directory entries.
This setting is not supported if the Polycom HDX system is
paired with the Polycom Touch Control.
if necessary).
Polycom, Inc.