Changing The Video Format - Polycom HDX 4000 Series Administrator's Manual

Changing the Video Format

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following figure shows you the location of the restore button on the back
of the Polycom EagleEye Director.
To reset the Polycom EagleEye Director using the restore button:
Be sure to keep the Polycom EagleEye Director powered on during the factory
restore.
Press and hold the restore button on the back of the EagleEye Director for
1
2-3 seconds while the power light cycles.
When normal video content is displayed on the monitor instead of a blue
screen, the EagleEye Director has been successfully restored.
Release the restore button.
2
If you cannot see the user interface on the system's monitor, make sure that the
system and the monitor are both powered on, and then do one of the
following:
To change the video format, do one of the following:
• Go to the Polycom HDX web interface, select Admin Settings > Monitors,
change the Video Format, and click Update.
Troubleshooting
Restore Button
12–7