Default Wallnet Ip Address - Planar Wallnet Setup & Operation

9

Default WallNet IP Address

Out of the box, or after a complete factory reset,
all WallNets have this IP address:
192.168.12.12
... and this Mask: 255.255.255.0
WallNet attempts to configure using DHCP for
ten seconds. If no DHCP server responds in ten
seconds, then the default static IP address above
is configured.
You can use WallNet Assistant to configure a
route from your PC to a WallNet at the default
static IP address without changing your PC's IP
address. See "Connecting With No DHCP" on
page 15.
Remove and reapply power to reboot
WallNet.
Default WallNet IP Address
77