Connecting To Wallnet - Planar Wallnet Setup & Operation

Connecting to WallNet

2
3
Connecting to WallNet
1
2
✎
For SiFi capable installations, WallNet power may
come from the bottom of the control board. A cable
is supplied for this connection.
16
At the prompt, type ipconfig and press
[Enter].
In a few seconds your computer's IP address
will be shown. If ipconfig doesn't work,
try winipcfg.
Write down the IP address. You won't need
the mask or other information. Keep the
Command Prompt window open; you will
need it later.
DO NOT connect WallNet to the network.
CPU LED
No network
connection
Apply power to WallNet with no network
connection.