Planar Wallnet Setup & Operation page 40

Mounting the WallNet for c50SP/c67SP/c70SPw Displays
3
.
34
e. Insert the grommet (supplied) into the
hole in the back of the chassis below the
control board.
f. Feed a network cable from your network
through this hole to the server.
With the cables connected, clip the device
server onto the bracket.
a. The server should be oriented so the
adapter is toward the middle of the
chassis.
b. Hold the right side of the server against
the chassis bottom and slide it onto the
bracket.
c. Press down on the server and it will click
into place.