Email Settings - Planar Wallnet Setup & Operation

Email Settings

5
6
Email Settings
1
2
3
4
5
24
Enable telnet login is rarely needed, but is
available for those who understand it and
need it. If you need to enable telnet login,
you can log in as user 'root' with the
password 'clarity' . If you enable telnet
permanently, consider changing the root
password, using the 'passwd' command, to
enhance security. Saving the WallNet
configuration also saves any root password
change.
When you are finished making changes,
click Change network access.
In the menu area, select Network Setup.
In the Email section, enter the SMTP mail
server name or address supplied by your
network administrator. WallNet uses the
SMTP server to send email reports and
alerts, which you will configure later.
Without a valid SMTP server, WallNet
cannot send email.
In the Email from and reply-to address
box, enter the email address from which
you want to send reports and alerts. This
email will also be the address to which
people receiving reports and alerts will
reply.
Click Confirm and apply new network
settings to receive the Confirm Network
Change page.
Review the network settings to make sure
they are correct. If they are, click OK, apply
changes now.