Differences In Wallnet Menus; Plug It In - Planar Wallnet Setup & Operation

Differences in WallNet Menus

2
3
✎
You may need to reload or refresh the web browser
to see the new product name appear above the
main area, because sometimes browsers display
cached pages.
Clicking the button in step 3 stops and restarts
the web server running in WallNet. There is a
separate web server for each display product.
Differences in WallNet Menus
Several of the menus take on different
appearances depending on the Planar display
type. For instance, Margay does not support SiFi
functions, so there is no Auto Color Balance or
Dual Lamp Control.

Plug It In

Plug the WallNet hardware into the RS232 IN
connector on the Planar display.
1
2
Note:
connect the adapter to the AUX232 IN connector
on the bottom of the control board.
26
Under the Select Display Product Type
section, select: LED Series, cXXSP/RX/RP or
Margay II.
If you see another display not listed here,
select the option that matches your display
product.
Click Change Display Setting.
Use the 9-pin to RJ45 adapter provided with
the WallNet system. Plug it into the 9-pin
connector on the WallNet device server.
For non-SiFi applications, use a supplied
straight-thru cable to go from the adapter
to the RS232 IN connector on the display.
For SiFi capable displays, you can choose to