Connecting With Dhcp - Planar Wallnet Setup & Operation

Connecting With DHCP

The instructions in this section will only work if your
local network has a DHCP server. If you don't know
whether or not it has this, contact your network
administrator.
This section provides instructions to establish the
initial network connection to a WallNet that is in its
factory default state. After you have made this first
connection and have a web browser displaying the
WallNet home page, you are ready to continue with
the instructions. See "Configuring WallNet" on
page 19.
DO NOT APPLY POWER to the WallNet device
server yet!
1
2
First, connect the WallNet device server to
the network.
Network
connection
Then, connect power to the box. (See the
following page.) During startup, the LEDs
turn on and off as the WallNet software
goes through its initialization process. When
this is complete, the CPU LED blinks
continually: one second on, one second off.
This tells you the box is working and ready
for the next step.
Connecting With DHCP
11