Status Views - Planar Wallnet Setup & Operation

Status Views

Status Views
Note:
Start WallNet in a web browser and select Status
Views in the menu area. There are three types of
status reports: Brief, Full or Full and Memory. Note
that Full Status and Memory (available only for
displays with the memory slot feature) will take a
significant amount of time to download if many
of the memory slots are used.
1
2
3
4
From the return information, you can learn some
basic facts. If all of the following are true, you can
be reasonably certain that the display is showing
the picture from the selected source:
• Display power or at least one lamp is on
• Mode is settled on something reasonable, not
• Displayed Pattern is None (no test pattern is
• If the Menu or MIP Displayed is No, the source
50
You need View authority to do anything here.
Click Brief Status or Unit Status.
Choose a single ID in the dropdown list to
the right of Get status for: This list has all
the IDs assigned to (and connected to) this
WallNet. If you think some are missing, add
them in Display Control > RS232 Setup.
Click Get status for: After a few moments,
the browser displays the report for that
display.
Look at the first few times. If there is no
status information shown, then WallNet is
not connected to that display or that display
has no AC power.
Searching or Source Absent
being displayed)
picture is not partly covered with a menu