Email Color Balance Result; Cancel Pending Color Balance Or Lamp Switch; Reset To Factory Colors; Test Pattern - Planar Wallnet Setup & Operation

Auto Color Balance

Email Color Balance Result

Type in the email addresses and subject line for
which you want ACB information to be sent. This
can include ACB results and related diagnostic
information. You can choose to automatically
send email after every color balance or to
manually send only the last ACB result. If you
have made any changes to email addresses or the
subject line, click Change ACB Email Settings.
Before you exit this screen, make sure to save the
WallNet configuration to make any changes
permanent.
CANCEL Pending Color Balance or Lamp
Switch
When there is a scheduled color balance or dual
lamp switch, there is a five-minute warning
period in which you can cancel the color balance
or lamp switch. During the warning period, a
message is displayed on the wall for about ten
seconds each minute.

Reset to Factory Colors

This recalls the factory colors for each of the
displays.

Test Pattern

This makes several colors available to check the
quality of the color balance.
61