Planar Wallnet Setup & Operation page 65

Auto Color Balance
For the LED series, you can change the display
profile for the wall using the Display Profile
dropdown list. If you have already set the display
profile on your wall, you do not have to select it
again here. For more information about display
profiles, see the c50RP-RX-LED, 67RP-RX-LED,
c70HD-LED Installation Guide.
Balance wall brightness only can be checked to
skip the color matching portion of ACB and
balance brightness only. This option is only
available for the LED series products.
Balance to white point
For the LED series, the Default white point is
generally recommended. This is because an
optimal target white point is included in the
display profile. For lamp-based systems, the
default setting is called Brightest because it
balances to the brightest white point that all the
displays in the wall can attain.
The other entries in the white point dropdown list
are color temperatures that correspond to
commonly used white point targets. For the LED
series, if you choose a white point that is too far
from the default for the current display profile,
then ACB will not proceed. The warning
messages on the screen will list the display
profiles that are compatible with the selected
white target.
For all products, the Custom setting allows you to
enter CIE coordinates in the x, y boxes for a
custom white target.
59