Configuration Process On The Dp Master - BONFIGLIOLI Vectron Agile Series Communications Manual

Setting PPO Type
13.1

Configuration Process on the DP Master

The configuration process of the frequency inverter with the Profibus communication module CM-
PDPV1 is shown here using the example of a Siemens STEP7 hardware configurator. The process is
principally valid for other configurations in an equivalent form.
First of all the BV__0B2C.GSD is created in the Hardware Configurator (if not already present). This is
carried out with by selecting the Extras\Neue GSD installieren menu. Here you enter the path and
the name of the GSD-file (BV__0B2C.GSD).
If the GSD file is installed then the frequency inverter appears in the menu:
If the GSD file is installed then the frequency inverter appears in the menu:
PROFIBUS-DP\Weitere FELDGERÄTE\Antriebe\ACU/AGL-DPV1
From this position a ACU/AGL-DPV1 frequency inverter can be created on the Profibus line using
drag & drop.
20 Profibus DP V1 Agile 06/2010