Select The Protocol; Set The Communication Parameters - BONFIGLIOLI Vectron Agile Series Communications Manual

6.2

Select the Protocol

• Select Profibus.
Select the "Setup" menu using the arrow keys.
Using the arrow keys select:
Setting up a Communication Interface (Bus Configuration)
Select a protocol using the arrow keys:
CANopen
4
Profibus
Systembus
Modbus
VABus
6.3

Set the Communication Parameters

Parameter
391 Node Number
4
The selection is only possible if an optional CM-PDPV1 Communication Module is installed.
14
Commissioning via the Operator Panel
Profibus DP V1 Agile
Display

ENT

ENT





ENT
Display

06/2010