Starting Up The Cleaning Device; Prerequisites For Start-Up; Start-Up - Fronius Robacta Reamer Alu Edition Manual

Starting up the cleaning device

Prerequisites for The following requirements must be met before the cleaning device is started up:

start-up

-
-
-
-
-
-
-
-
-
Start-up The cleaning device starts up when there is an active signal from the robot control.
58
If present, the cleaning device installation stand is bolted to underlying surface
Cleaning device is bolted to underlying surface
Only on the Robacta Reamer Alu Edition and Robacta Reamer Alu 3000upm: gas
nozzle clamping device is adjusted
Cleaning cutter / cleaning brush has been fitted
Lifting device has been adjusted
On the Robacta Reamer Twin: Parting agent nebuliser has been started up
Compressed air supply has been established
Cleaning device is connected to robot control
All covers are fitted and all safety devices are intact and in their proper place