Programme Sequence And Signal Waveform On The Robacta Reamer Alu Edition And Robacta Reamer Alu 3000Upm; Cleaning Program Sequence - Fronius Robacta Reamer Alu Edition Manual

Programme sequence and signal waveform on the
Robacta Reamer Alu Edition and Robacta Reamer
Alu 3000upm
Cleaning program
sequence
Risk of damage.
Do not start in automated mode until the cleaning device has been properly installed and
started up.
NOTE!
Not coating the interior of the welding torch may result in permanent soiling of the
torch when welding begins.
Always wet the interior of the welding torch with the manufacturer's parting agent before
starting automatic operation.
CAUTION!
59