Care, Maintenance And Disposal; General; Before Each Start-Up; Daily - Fronius Robacta Reamer Alu Edition Manual

Care, maintenance and disposal

General

The cleaning device generally needs no maintenance. However, to keep the cleaning de-
vice in good working condition for years to come, several points on care and maintenance
must be observed.
Before each start- -
up
-
-
-
-

Daily

NOTE!
Only use solvent-free cleaning products on the cleaning device.
-

Weekly

NOTE!
Only use solvent-free cleaning products on the parting agent container.
Only Robacta Reamer Twin:
-
-

Every 6 months

Open the device and check the pneumatic valves for:
-
-
-

If necessary

Open the device and
-
-

Disposal

Dispose of in accordance with applicable national and local regulations.
Only Robacta Reamer Twin: Check fill level in parting agent container and top up if
necessary
Check the cleaning cutter / cleaning brushes for wear and replace if necessary
Empty the cleaning device spatter tray
If fitted, empty the wire cutter tray
Perform a general visual inspection on the device
Remove parting agent deposits and dirt from device
Check parting agent container for soiling and clean if necessary
Blow through the suction filter in the parting agent container using compressed air
from the inside outwards through the suction hose (see "Starting up the Robacta
Reamer Twin parting agent nebuliser")
leaks
the secure seating of all screws
the secure seating of all screw joints on the pneumatic valves
clean the inside of the device using dry reduced compressed air
lightly oil the lifting device cylinder guides
73