Komatsu ecot3 PC300LC-8 Shop Manual page 454

SEN02626-04
Adjustment (Attachment Flow Adjustment)
The operator can adjust various items related to the
machine with the machine monitor.
The function of "Attachment Flow Adjustment" is
used to finely adjust the oil flow to the attachment in
compound operation.
1. Selecting menu
Select "Adjustment" on the "Service Menu"
screen.
2. Selecting sub menu
After the "Adjustment" screen is displayed,
select "Attachment Flow Adjustment" with the
function switches or numeral input switches.
a Select this item similarly to an item on the
"Service Menu" screen.
48
3. Selecting distribution of oil flow
After the screen of "Attachment Flow Adjust-
ment" is displayed, select a set value on the
right side with the function switches.
Set value: For actual distribution of flow,
q
see table
[F3]: Increase set value
q
[F4]: Decrease set value
q
[F6]: Confirm setting and return to Adjust-
q
ment menu screen
a The 3 digits on the left side do not vary
since they are the code of this function.
a Relationship between set value and distri-
bution of flow to attachment
Set
Code
value
000
001
044
002
003
30 Testing and adjusting
Distribution of flow to
attachment
50 %
70 %
100 %
40 %
PC300, 350-8