Komatsu ecot3 PC300LC-8 Shop Manual page 450

SEN02626-04
Default (ECO Display)
Check or change various settings related to the
machine monitor and machine by "Default".
The ECO display setting function is used to set the
display of the ECO gauge and energy saving guid-
ance.
1. Selecting menu
Select "Default" on the "Service Menu" screen.
2. Selecting sub menu
After the "Default" screen is displayed, select
"ECO Display" with the function switches or
numeral input switches.
a Select this item similarly to an item on the
"Service Menu" screen.
3. Selecting display setting
After the "ECO Display" screen is displayed,
select the setting with the function switches.
ON : Display ECO
q
OFF: Do not display ECO
q
[F3] : Move to left item
q
[F4] : Move to right item
q
[F5] : Cancel setting before confirmation
q
and return to "Default" screen
[F6] : Confirm selection in each line
q
a After confirming the setting of the upper
and lower lines with [F6], return to the
"Default" screen with [F5], and the setting
is effective.
44
30 Testing and adjusting
a If ECO display is turned ON, ECO is dis-
played when the screen changes to the
ordinary screen. Even if the energy saving
guidance is turned ON, however, it is not
displayed if the condition for display is not
satisfied on the ordinary screen.
a Display of ECO gauge (a)
a Display of energy saving guidance
PC300, 350-8