Komatsu ecot3 PC300LC-8 Shop Manual page 918

SEN02637-02
2) Disassemble No. 1 carrier assembly as
follows.
1] Insert pin (4) and drive shaft (5) out of
carrier (6).
a After removing the shaft, remove
pin (4).
2] Remove thrust washer (7), gear (8),
bearing (9), and thrust washer (10).
5. No.1 sun gear shaft
Remove No. 1 sun gear shaft (11).
6. No.2 sun gear shaft
Remove No. 2 sun gear shaft (12).
7. Thrust washer
Remove thrust washer (13).
4
50 Disassembly and assembly
8. Ring gear
Remove ring gear (14) using eyebolt [3].
9. No.2 carrier assembly
1) Remove No.2 carrier assembly (15).
2) Disassemble No. 2 carrier assembly as
follows.
1] Insert pin (16) and drive shaft (17) out
of carrier (18).
a After removing the shaft, remove
pin (16).
2] Remove thrust washer (19), gear (20),
bearing (21), and thrust washer (22).
PC300, 350-8