Komatsu ecot3 PC300LC-8 Shop Manual page 445

30 Testing and adjusting
Default (Key-on Mode)
Check or change various settings related to the
machine monitor and machine by "Default".
The function of working mode with key ON is used
to set the working mode displayed on the machine
monitor when the starting switch is turned ON.
1. Selecting menu
Select "Default" on the "Service Menu" screen.
2. Selecting sub menu
After the "Default" screen is displayed, select
"Key-on Mode" with the function switches or
numeral input switches.
a Select this item similarly to an item on the
"Service Menu" screen.
3. Selecting mode
After the "Key-on Mode" screen is displayed,
select the mode to be set with the function
switches.
Power Mode: [P] is displayed when key is
q
ON
Economy Mode: [E] is displayed when key
q
is ON
Lifting Mode: [L] is displayed when key is
q
ON
Breaker Mode: [B] is displayed when key
q
is ON
Attachment Mode: [ATT] is displayed
q
when key is ON
PC300, 350-8
Mode at Previous Key-off: Final mode in
q
previous operation is displayed when key
is ON
[F3]: Move to lower item
q
[F4]: Move to upper item
q
[F5]: Cancel selection and return to
q
"Default" screen
[F6]: Confirm selection and return to
q
"Default" screen
a When the machine is delivered, Mode at
previous key-OFF is set.
a If "With attachment" is not set, the attach-
ment mode cannot be selected.
a While Attachment mode [ATT] is selected,
if "Without attachment" is set, Power
mode [P] is displayed when the key is
turned ON.
a If the engine is stopped while breaker
mode [B] is selected in the operator mode,
Breaker mode [B] is always displayed,
regardless of the above setting.
SEN02626-04
39