Komatsu ecot3 PC300LC-8 Shop Manual page 985

50 Disassembly and assembly
15. Remove duct (20).
16. Disconnect connector (21).
17. Remove plates (22) and (23) from the operator
cab.
18. Pass over and disconnect antenna (24) from
KOMTRAX communication modem.
19. Disconnect connectors K01(25) and CK02
(26).
20. Disconnect connector M10(27) from the opera-
tor's cab. (If equipped)
21. Disconnect cab wiring intermediate connectors
H09(28), H08(29), and H16(30).
a Cut tie-wrap (T),
22. Disconnect radio antenna (31).
a (23) is removed plate.
PC300, 350-8
23. Remove ducts (32) and (33).
a Cut tie-wrap.
24. Disconnect wiper motor connector M05(34).
25. Remove harness (35) and antenna (36) from
the cab wall.
a Cut 2 points of tie-wrap.
26. Remove duct (37).
27. Remove duct (38) upper and lower.
28. Disconnect window washer hose (39).
29. Disconnect harness clamp (40).
30. Haul in antenna (36).
SEN02641-02
3