Komatsu ecot3 PC300LC-8 Shop Manual page 312

SEN01998-05
User mode
Pressing F6 on the normal screen enters the
q
user mode, switching to the user menu screen.
q In user mode, you can specify items relating to
the machine monitor and machine shown
below.
Breaker/attachment setting
Message display
Screen adjustment
Time adjustment
Language setting
Economy mode adjustment
F3 : Selects (highlights) an item one down.
F4 : Selects (highlights) an item one up.
F5 : Returns to the normal screen.
F6 : Switches to the setting screen for the selected
item.
No operation at least 30 sec. : Returns to the nor-
mal screen.
(In user mode, no switch operation at least 30 sec.
returns to the previous screen.)
Breaker/attachment setting
q For an attachment-equipped machine, this
menu allows you to adjust a flow rate in B
mode and ATT mode.
q For a machine with no attachment, this menu
does not appear.
54
10 Structure, function and maintenance standard
1 F3 : Selects (highlights) an item one down.
F4 : Selects (highlights) an item one up.
F5 : Cancels changes you made before confirming
them with F6 to return to the menu screen.
F6 : Moves to the setup items of the selected (high-
lighted) item.
Selecting B switches to the breaker setting
q
menu, and selecting ATT switches to the
attachment setting menu.
You can lock this menu with a password.
q
Enabling the password lock locks the mainte-
nance reset screen at the same time.
Changing breaker mode setting
q Selecting B on the breaker/attachment setting
screen switches to the breaker setting screen.
On this screen, select the breaker setting
selection screen or breaker flow rate setting
screen.
F3 : Selects (highlights) an item one down.
F4 : Selects (highlights) an item one up.
F5 : Returns to the breaker/attachment setting
screen.
F6 : Switches to the setting screen for the selected
(highlighted) item.
PC300, 350-8