Komatsu ecot3 PC300LC-8 Shop Manual page 412

SEN02626-04
t
Operator mode (Outline)
a Only outline of the operator mode is described
in this section. For details of contents/opera-
tion of each function/display, see the Structure,
function and maintenance standard, or Opera-
tion and Maintenance Manual.
a The following are the displays or functions of
the operator mode explained in this section
(including some items which need special
operations).
Display of KOMATSU logo
Display of inputting password
Display of check of breaker mode
Display of check before starting
Display of warning after check
before starting
Display of ending of maintenance
interval
Display of check of working mode
and travel speed
Display of ordinary screen
Display of end screen
Selection of auto-deceleration
Selection of working mode
Selection of travel speed
Operation to stop alarm buzzer
Operation of windshield wiper
Operation of windshield washer
Operation of air conditioner/heater
Operation to display camera mode (if camera is
installed)
Operation to display clock and service meter
Check of maintenance information
Setting and display of user mode (including
KOMTRAX messages for user)
Display of energy-saving guidance
Display of caution monitor
Display of automatic judgment of breaker
Display of user code and failure code
O (Special operation)
Function of checking display of LCD (Liquid Crystal
Display)
Function of checking service meter
Function of changing attachment/maintenance pass-
word
6
a Display pattern of operator mode
Display pattern
A B C D E
1 1 1 1 1
2 — — — —
— — 2 — —
Display of KOMATSU logo
3 2 3 2 2
When the starting switch is turned ON, the
— — — 3 — KOMATSU logo is displayed for 2 seconds.
a After the KOMATSU logo is displayed for 2
— — — — 3
4 3 4 4 4
5 4 5 5 5
a The following screen may be displayed instead
a If this screen is displayed, call the person
30 Testing and adjusting
The contents of display from the time when
starting switch is turned ON to time when
screen changes to ordinary screen depends on
the setting and condition of the machine.
A : When engine start lock is set effective
B : When engine start lock is set ineffective
C : When working mode at start is set to
breaker mode (B)
D : When there is abnormal item in check-
before-starting items
E : When there is maintenance item which is
not maintained after specified interval
seconds, the screen changes to "Display of
inputting password", "Display of check of
breaker mode (if B mode is set)", or "Display of
check before starting".
of the above Display of inputting password
screen.
responsible to operation of KOMTRAX in your
Komatsu distributor and ask for remedy.
PC300, 350-8