SEN02626-04
Default (Attachment/Maintenance Password)
Check or change various settings related to the
machine monitor and machine by "Default".
The function of setting attachment/maintenance
password is used to set the display of the password
screen when the functions related to the attach-
ment and maintenance are used in the operator
mode.
1.
Selecting menu
Select "Default" on the "Service Menu" screen.
2.
Selecting sub menu
After the "Default" screen is displayed, select
"Attachment/Maintenance Password" with the
function switches or numeral input switches.
a Select this item similarly to an item on the
"Service Menu" screen.
42
3.
Selecting Disable/Enable
After the Attachment/Maintenance Password
screen is displayed, select the setting with the
function switches.
Disable : Password screen is not dis-
q
played
Enable : Password screen is displayed
q
[F3]
: Move to lower item
q
[F4]
: Move to upper item
q
[F5]
: Cancel selection and return to
q
"Default" screen
[F6]
: Confirm selection and return to
q
"Default" screen
4.
Displaying attachment/maintenance password
screen
When the following operation is performed, the
password screen is displayed in the operator
mode.
Maintenance mode: The Maintenance
q
table screen is changed to the Mainte-
nance interval reset screen.
User mode: On the User menu screen, the
q
Breaker/Attachment setting menu is
selected and the screen is changed to the
Attachment setting menu screen.
5.
Changing attachment/maintenance password
The password can be changed by operating
the switches specially in the operator mode.
a See Attachment/Maintenance password
changing function in the operator mode.
a Default password: [000000]
a If the password setting is changed from
Enable to Disable, the password is reset
to the default. When Enable is set again,
be sure to set a new password.
a The attachment/maintenance password is
different from the engine start lock pass-
word.
30 Testing and adjusting
PC300, 350-8