Komatsu ecot3 PC300LC-8 Shop Manual page 313

10 Structure, function and maintenance standard
1. Breaker setting selection screen.
q On this screen, you can allocate one of
two set flow rates as a flow rate in breaker
mode.
q The B symbol is displayed before items
specified to breaker mode.
a The defaults of both flow rates are 230 l/
min.
F3 : Selects (highlights) an item one down.
F4 : Selects (highlights) an item one up.
F5 : Returns to the breaker setting menu
screen.
F6 : Specifies the selected (highlighted) item
as a flow rate in breaker mode.
2. Breaker flow rate setting screen
q On this screen, you can specify a flow
rate.
The B symbol is displayed before items
q
specified to breaker mode.
F3 : Selects (highlights) an item one down.
F4 : Selects (highlights) an item one up.
F5 : Returns to the breaker setting menu
screen.
F6 : Switches to the flow rate level setting
screen for the selected (highlighted) item.
PC300, 350-8
q On the flow rate level setting screen,
change the set flow rate.
F3 : Decreases the flow rate.
F4 : Increases the flow rate.
F5 : Returns to the flow rate setting screen
without changing the flow rate.
F6 : Returns to the flow rate setting screen
after specifying the flow rate.
Flow level Flow rate (l/min)
15 273
14 250
13 240
12 230
11 220
10 210
9 200
8 190
7 180
6 170
5 160
4 150
3 140
2 130
1 120
Changing attachment mode setting
q Selecting ATT on the breaker/attachment set-
ting screen switches to the 2-way attachment
setting menu. On this screen, select the
attachment setting screen or breaker flow rate
setting screen.
SEN01998-05
Remarks
Default
55