Komatsu ecot3 PC300LC-8 Shop Manual page 418

SEN02626-04
Operation to display camera mode (if camera is
installed)
When a camera is installed, if [F3] is pressed, the
multi-display changes to the camera image (Set the
connection of the camera in the service mode).
a Up to 3 cameras can be connected. If the cam-
era mode is selected, however, only the image
of camera 1 is always displayed.
a If a caution is generated in the camera mode,
the caution monitor is displayed at the left
upper of the screen (The low hydraulic oil tem-
perature caution is not displayed there, how-
ever).
12
a When an error that there is a user code occurs
in the camera mode, if you do not touch any
control lever for 10 seconds, the screen
changes to the ordinary screen and displays
the error information.
a When two or more cameras are connected, the
image of one of them or the images of two of
them can be displayed.
If 2-camera image display [F4] is selected, the
image of camera 1 is displayed on the left side
of the screen and the image of camera 2 is dis-
played on the right side. The image of camera
3 is displayed only singly.
a If the images of 2 cameras are displayed
simultaneously, images are displayed at inter-
vals of 1 second on the right and left screen.
Operation to display clock and service meter
While the ordinary screen is displayed, press [F4],
and section (a) changes to the service meter and
clock alternately.
a When the clock is selected, adjust the time, set
12-hour or 24-hour display, and set the sum-
mer time with the user mode function.
30 Testing and adjusting
PC300, 350-8